The Engine Start Small Water Pump/ Multistage Centrifugal Pump / Ring Section Centrifugal Pump MD80-30 (3-10 serise)

• Customization: Available
• After-sales Service: Other
• Warranty: 1 Year
• Model NO.: MD80-30(3-10 serise)
• Max.Capacity: 43m3/H
• Driving Type: Motor
• Impeller Number: Multistage Pump
• Working Pressure: Low Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Horizontal Pump
• Pump Casing Combined: Horizontal Split Pumps
• Mounting Height: Suction Centrifugal
• Impeller: Closed
• Usage: Pump, Pumps, Fresh Water ,Mines,Plants and Municipal Work
• Qualification 1: Coal Mine Safety Certification
• Qualification 2: Internaltional Quality System Certification
• Qualification 3: ISO9001:2015
• Qualification 4: Utility Model Patent Product
• Transport Package: Shipping Wooden Case
• Specification: customized
• Trademark: Canpump
• Origin: Changsha, Hunan, China
• HS Code: 84137010
• Production Capacity: 20000 Pieces/Year

Product Description

Product drawing:

Table of performance parameters:

 

 

 

 

Product profile:
  This series of pumps are horizontal single suction multistage segmented centrifugal pumps using state-recommended hydro-module. The pump is efficient, reliable,and durable with low noise performance,easy maintenance and wide scope of usages.We specialize in manufacturing D,DF,DY and MD series of single-suction multistage .Our pumps are widely applicable.
Our pump is applicable to deliver those fluid without solid particles or any other suspended stuff, water for instance. While oily and corrosive or solid-contained fluid can be pumped by means of material modification,sealing methods, and cooling system adding.
The max.inlet pressure shall be 0.6MPa.

Scope of application
Horizontal multi-stage centrifugal pumps according to their scope of use can be divided into the following types:

D type: Used for transmission of water free of solid particles and temperature below 80 ºC,or similar physical and chemical liquid.Suitable for mining,mill and city water supply and drainage. Cast iron material wet parts;1045,080M46 ASTM steel for shaft.

DF type: Used for transmission of corrosive liquid with temperature below 80 ºC and non-solid particles. Material sealing methods, structure of the pump and motor model can be determined by medium,gravity,density,working temperature and the suction pressure.

DY type: Used for transmission of non-solid oily liquid and petroleum product with temperature below 80 ºC and viscosity less than 120 cSt.

MD type: Used for transmission of neutral liquid from mining well or other similar liquid. The density and size of particles of the sewage shall be less than 1.5% and 0.5mm respectively. The temperature below 80 ºC.

Scope of  behavior :

D , DF , DY and MD pumps have the same performance parameters

The inlet and outlet diameter of the pump ranges 40~300mm

Flow Q=3.75~850m3/h

Lift H=19~816m

Motor power N=5.5~1600kw



Model's meaning
Such as D (DF, DY, MD)600- 60x6 
 
D   -----horizontal multi-stage fresh water/ multistage centrifugal pump

DF ----mine corrosion resistant horizontal multistage centrifugal pump

DY   --horizontal multi-stage centrifugal oil pump

MD  --mine wearing resistant horizontal multistage centrifugal pump

600   -design point flow is 600m3/h

60   ---design point single-stage lift: 60m

6   -----pump stages: 6




About us:

Application scenario---the pump house:


Scope of application:

Package shipment:
 

Note:
   The material is determined according to the temperature and corrosive of the transmission medium.

   If there are special circumstances beyond the performance parameter table, the consultation on pump selection can be provided.

   Our company can select materials according to the specific requirements of users, or produce according to the materials required by users.